MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem Guide de l'utilisateur télécharger pdf (Page 39)

WebSTAR DPX2203C and EPX2203C VoIP Cable Modem User’s Guide

How Do I Mount the Cable Modem on a Wall? (Optional)

You can mount the cable modem on a wall using two wall anchors, two screws, and the mounting slots located on

the unit. The modem can only be mounted horizontally.

Before You Begin

Before you begin, choose an appropriate mounting place. The wall can be made

of cement, wood, or drywall. The mounting location should be free of obstructions

on all sides, and the cables should be able to easily reach the cable modem

without strain. Leave sufficient clearance between the bottom of the cable

modem, and any flooring or shelving underneath, to allow access to cabling. In

addition, leave enough slack in all cables so that the cable modem can be

removed for any required maintenance without disconnecting the cables. Also,

verify that you have the following items:

• Two wall anchors for #8 x 1 inch screws

• Two #8 x1 inch pan head sheet metal screws

• Drill with a 3/16-in. wood or masonry bit, as appropriate for the wall

composition.

• A copy of the wall-mounting template shown on the following page

Mount the modem as shown in the following illustration.

T11736

Horizontal Mounting

1/4 in.

(0.65 cm)

Screw

Mounting

Screws

Mounting

Holes

Concrete,

Wood, or

Drywall

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

Pas de commentaire

MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem Guide de l'utilisateur Page 39