MaxTech NX-16 Guide de l'utilisateur télécharger pdf (Page 12)

must use solid copper conductors and UL codes

CM, CMR, and CMP are required. The computer

on the network is connected via a star topology (i.e.

each node is connected to a HUB, not to each

other). Maximum cable length is 300' (100 m).

10Base-2 networks uses a single conduc-

tor coaxial cable and BNC connectors. Use only

RG-58A/U or RG-58C/U coaxial cables. Each

network node is connected to the coaxial cable via

a T-connector (included). The minimum distance

between T-connectors is 1.6' (0.5m). The T-con-

nector must be plugged directly into the network

adapter (no cable is allowed between the T-con-

nector and the adapter). No more then 30 connec-

tions are allowed per segment and the maximum

segment length is 607' (185 m). The cable must be

terminated at each end by one 50-ohm terminator.

Section Six - Specifications

Network Standard: IEEE 802.3

EthernetInterface: ISA bus 8 or 16 bit, auto detect

Hardware Compability: NE2000

I/O address: 200, 220, 240, 260, 300, 320, 340, 360

IRQ line: 2 (9), 3, 4, 5, 10, 11, 12, 15

RAM buffer: 16 KB

Boot ROM address: C800, CC00, D000, D400, D800, DC00

Power: 0.33A @ 5V

Temperature: 0 to 55 degrees C (Operating); -20 to 80

degrees C (Non-operating)

Humidity: 10% to 90% (Non condensing)

Dimensions: 6.20" x 2.48"

Certification: FCC Part 15 Class A

Drivers: Novell NetWare 3.x, 4.0, NetWare LAN WorkPlace

TCP/IP, Novell LAN Analyzer for NetWare, Wollongong Path-

way Access, FTP PC/TCP, NCSA TCP/IP, LAN Manager V2.1,

Windows For Workgroups, IBM LAN Server 2.x, IBM LAN

Support V1.2, IBM OS/2 EE V2.0, DEC Pathworks V4.x, SUN

PC-NFS, Banyan VINES V5.5, IBM TCP/IP for DOS and OS/2

1 2 ... 7 8 9 10 11 12 13 14

Pas de commentaire

MaxTech NX-16 Guide de l'utilisateur Page 12